Asus SK8V - Manual (Page 98)

4-32 Chapter 4: BIOS Setup
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Power Management/APM [Enabled]
Power Button Mode [On/Off]
Suspend Power Saving Type
[C3]
Restore on AC Power Loss [Power Off]
Suspend Time Out [Disabled]
Hard Disk Time Out (Minute) [Disabled]
Video Power Down Mode [Suspend]
Hard Disk Power Down Mode [Enabled]
Power On By RTC Alarm [Disabled]
Power On External Modems
[Disabled]
Power On PCI Device [Disabled]
Resume On PS/2 Keyboard
[Disabled]
Resume On PS/2 Mouse [Disabled]
Enabled or disable
APM.
4.5.5 APM Configuration
Power Management/APM [Enabled]
Allows you to enable or disable the Advanced Power Management (APM)
feature. Configuration options: [Disabled] [Enabled]
Power Button Mode [On/Off]
Allows the system to go into On/Off mode or suspend mode when the
power button is pressed. Configuration options: [On/Off] [Standby]
[Suspend]
Suspend Power Saving Type [C3]
This item allows you to set the suspend power saving type.
Configuration options: [C3] [S1]
Restore on AC Power Loss [Last State]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state
whatever was the system state before the AC power loss. Configuration
options: [Power Off] [Power On] [Last State]
Suspend Time Out [Disabled]
Allows you to select the specified time at which the system goes on
suspend mode. Configuration options: [Disabled] [1 Min] [2 Min] [4 Min]
[8 Min] [10 Min] [20 Min] [30 Min] [40 Min] [50 Min] [60 Min]
The following items appear only when the Power Management/APM
item is set to [Enabled].