3 asus post reporter, 1 vocal post messages – Asus SK8V User Manual
Page 59

ASUS SK8V motherboard
3-3
3.3
ASUS POST Reporter™
This motherboard includes the Winbond speech controller to support the
ASUS POST Reporter™ feature. This feature gives you vocal POST
messages and alerts to inform you of system events and boot status. In
case of a boot failure, you will hear the specific cause of the problem.
These POST messages are customizable using the Winbond Voice Editor
software that came with your package. You can record your own
messages to replace the default messages.
POST Message
Action
No CPU installed
• Install a supported processor into
the CPU socket. See section “2.3
Central Processing Unit (CPU)” for
supported processors.
System failed CPU test
• Check the CPU if properly installed.
• Call ASUS technical support for
assistance. See the “ASUS contact
information” on the inside front
cover of this manual.
System failed memory test
• Install supported DDR DIMMs into
the sockets.
• Check if the DIMMs on the DIMM
sockets are properly installed.
• Make sure that your DIMMs are
not defective.
• Refer to section “2.4 System
memory” for instruction on installing
a DIMM.
System failed VGA test
• Install a PCI VGA card into one of
the PCI slots, or a 1.5V AGP card
into the AGP slot.
• Make sure that your VGA/AGP card
is not defective.
3.3.1 Vocal POST messages
Following is a list of the default POST messages and their corresponding
actions:
Make sure that the speaker is plugged in the Line-out jack.