Asus A7V600-X - Manual (Page 76)

3-12 Chapter 3: Starting-Up
4. Select Select Disk Drives, then press . Use arrow keys to select disk
drive/s, then press to mark selected drive. (An asterisk is placed
before a selected drive.)
5. Select Start Create Process and press to setup hard disk for RAID
system. The following confirmation message appears:
Press “Y” to confirm or “N” to return to the configuration options.
The data on the selected disks will
be destroyed. Continue? Press Y/N
RAID SPAN for capacity
1. Select the second option item Array Mode, then press the key. The
RAID system setting pop-up menu appears.
RAID 0 for performance
RAID 1 for data protection
RAID 0/1
RAID SPAN for capacity RAID SPAN for capacity
2. Select RAID SPAN for capacity from the menu and press . From this
point, you may choose to auto-configure the RAID array by selecting Auto
Setup for Capacity or manually configure the RAID array for spanned sets. If
you want to manually configure the RAID array continue with next step. Screen
reference on Auto Setup for Capacity can be found in step #4
3. Select Select Disk Drives, then press . Use arrow keys to select disk
drive/s, then press to mark selected drive.(An asterisk is placed before
a selected drive.)
The same confirmation message appears when the Auto Setup for Data
Security option is selected.