Asus P5B Premium Vista Edition - Manual (Page 94)

- Chapter 4: BIOS setup
Memory Remap Feature [Disabled]
Allows you to enable or disable the remapping of the overlapped PCI memory
above the total physical memory. Enable this option only when you install 64-
bit operating system. Configuration options: [Disabled] [Enabled]
Configure DRAM Timing by SPD [Enabled]
Configuration options: [Enabled] [Disabled]
Static Read Control [Auto]
Allows you to adjust the Static Read Control function.
Configuration options: [Disable] [Auto] [Fast] [Faster]
Initiate Graphic Adapter [PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot
device. Configuration options: [PCI/PEG] [PEG/PCI]
PEG Force x1 [Disabled]
Configuration options: [Enabled] [Disabled]
ASUS C.G.I. [Auto]
Allows you to enable or disable the ASUS Cross Graphics Impeller.
Configuration options: [Auto] [Enabled] [Disable]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
South Bridge Chipset Configuration
PCIEX16_2/PCIEX1_1 Force [Auto]
South Bridge Chipset Configuration
PCIEX16�2/PCIEX1�1 Force [Auto]
Allows you to manually adjust PCIEX16_2/PCIEX1_1 configuration.
Configuration options: [X2 Mode (compatible)] [X4 Mode (fast)] [Auto]
Allows you to manually
adjust PCIEX16_2 and
PCIEX1_1 configuration
Configuration options:
[X2/X1 Mode(compatible)]
[X/disabled Mode(fast)]
[Auto]