Asus Crosshair V Formula-Z - Manual (Page 100)

3-20 Chapter 3: BIOS setup
Chapter 3
Memory Configuration
Bank Interleaving [Auto]
Configuration options: [Auto] [Disabled]
Channel Interleaving [Auto]
Configuration options: [Auto] [Disabled]
Warm Boot RAM [Enabled]
Allows you to reuse data in RAM after warm boot to speed up boot.
Configuration options: [Disabled] [Enabled]
Memory Clear [Disabled]
Allows you to clear the settings saved in RAM.
Configuration options: [Disabled] [Enabled]
ECC Mode [Enabled]
Enables or disables the DRAM ECC mode that allows the hardware to report and
correct memory errors.
[Disabled] Disables the DRAM ECC mode.
[Enabled] Set to [Enable] to adjust ECC mode automatically.
Power Down Enable [Disabled]
Enables or disables the DDR power down mode.
Configuration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Configuration options: [Disabled] [Enabled]
DCT Unganged Mode [Enabled]
Configuration options: [Disabled] [Enabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to select which graphics controller to use as the primary boot device.
Configuration options: [PCI/PEG] [PEG/PCI]
3.5.3 South Bridge Configuration
HPET [Enabled]
Allows you to set the HPET timer.
Configuration options: [Disabled] [Enabled]