Asus P8Q77-M2 - Manual (Page 63)

Chapter 2: BIOS information 2-19
S.M.A.R.T. Status Check [Enabled]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When
read/write of your hard disk errors occur, this feature allows the hard disk to report warning
messages during the POST. Configuration options: [Enabled] [Disabled]
Hot Plug [Disabled]
This item only appears when you set the SATA Mode Selection item to [AHCI] or [RAID]
and allows you to enable or disable the hot-plug support for each SATA port. Configuration
options: [Enabled] [Disabled]
2.5.5 System Agent Configuration
Memory Remap Feature [Enabled]
Enables or disables the memory remap feature. Configuration options: [Enabled] [Disabled]
VT-d [Enabled]
Enables or disables the Intel ® VT-d function on MCH (Memory Controller Hub). Configuration
options: [Enabled] [Disabled]
Graphics Configuration
Primary Display [Auto]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [Auto] [iGPU] [PCIE] [PCI]
iGPU Memory [Auto]
Allows you to set the iGPU memory size. Configuration options: [Auto] [32M] [64M]
[96M] [128M] ~ [448M] [480M] [512M] [1024M]
Render Standby [Enabled]
Allows you to enable or disable Render Standby by internal graphics devices.
Configuration options: [Disabled] [Enabled]
iGPU Multi-Monitor [Disabled]
Allows you to enable or disable the iGPU Multi-Monitor. For Lucid Virtu Universal MVP
function support, set this item to [Enabled] to empower both the integrated and discrete
graphic cards. The iGPU shared memory size will be fixed at 64MB.
Configuration options: [Disabled] [Enabled]
NB PCIe Configuration
PCIE x16_1 Link Speed [Auto]
Allows you to set the PCIE x16_1 link speed. Configuration options: [Auto] [Gen1]
[Gen2] [Gen3]
2.5.6 Intel TXT(LT) Configuration
Secure Mode Extensions (SMX) [Enabled]
Allows you to enable or disable the Intel Secure Mode Extensions (SMX) technology.
Configuration options: [Disabled] [Enabled]