Asus P2E-N - Manual (Page 105)

105 ASUS P2L-N/P2E-N User’s Manual
D. Audio Driver
DOS Game Support
DOS support allows DOS applications to utilize the audio card in DOS mode. The
game support level is set to “DOS Box and Native DOS” by default, you can change
the setting by the following steps.
NOTE: The onboard audio may not work properly for DOS applications that do not
have Sound Blaster support.
Select Game support for setup DOS game
support, and “Game Support Selection”
screen will appear.
You can obtain information on your audio
card in DOS mode (not in Windows DOS
box) by typing c:\MAESTRO (The value
shown may be different for your system.
The information shown may be required
by DOS audio applications. Choose Sound
Blaster Pro or Sound Blaster in DOS ap-
plications if prompted.)
You will be prompted to restart your com-
puter. Click Finish to restart.
Select DOS Box and Native DOS support
if you want to use DOS applications in both
DOS Box and Native DOS (to use applica-
tions in DOS without entering Windows).
Otherswise, you can select “DOS Box sup-
port only” or “NO DOS support”.
After setup, two files (AECU.SYS and MAESTRO.COM) should have been copied
into the root directory. There should also be two lines added to the AUTOEXEC.BAT
and CONFIG.SYS as follows:
[AUTOEXEC.BAT]
c:\maestro.com
[CONFIG.SYS]
device=c:\aecu.sys
D. Audio
Driver
DOS Support