Asus SL1200 - Manual (Page 8)

8 ASUS SL100
Windows ® 95, 98, and Me PCs
1. In the Windows task bar, click Start -> Settings -> Control Panel.
. Double-click the Network icon.
In the Network dialog box, look for an entry started w/ “TCP/IP ->” and
the name of your network adapter, and then click <Properties>. You
may have to scroll down the list to find this entry.
If the list includes such an entry, then the TCP/IP protocol has already
been enabled. Skip to step 8.
. If Internet Protocol (TCP/IP) does not display as an installed
component, click <Add>.
4. In the Select Network Component Type dialog box, select Protocol,
and then click <Add>.
5. Select Microsoft in the Manufacturers list box, and then click TCP/IP in
the Network Protocols list, box and then click <OK>.
You may be prompted to install files from your Windows 95, 98 or Me
installation CD or other media. Follow the instructions to install the files.
. If prompted, click <OK> to restart your computer with the new settings.
Next, configure the PCs to accept IP information assigned by the
router.
7. In the Control Panel, double-click the Network icon.
8. In the Network dialog box, select an entry started with “TCP/IP ->” and
the name of your network adapter, and then click <Properties>.
9. In the TCP/IP Properties dialog box, click the radio button labeled
Obtain an IP address automatically.
10. In the TCP/IP Properties dialog box, click the Default Gateway tab.
Enter 19.18.1.1 (the default LAN port IP address of the router) in
the New gateway address field and click <Add> to add the default
gateway entry.
11. Click <OK> twice to confirm and save your changes, and then close
the Control Panel.
1. If prompted to restart your computer, click <OK> to do so with the new
settings.