Asus SL1200 - Manual (Page 17)

17 ASUS SL100
Figure 11. Setup Wizard - WAN Dynamic IP Configuration Page
a) PPPoE Connection Mode (see Figure 10)
• You do not need to enter primary/secondary DNS IP addresses.
PPPoE is able to automatically obtain this information for you from
your ISP. However, if you prefer to use your favorite DNS servers, you
may enter them in the space provided.
• Host name is optional. You may leave it empty if your ISP did not
provide such information.
• Enter the user name and password provided by your ISP.
• Click <Apply> to save the PPPoE settings.
b) Dynamic IP Connection Mode (see Figure 11)
• You do not need to enter primary/secondary DNS IP addresses.
DHCP client is able to automatically obtain this information for you
from your ISP. However, if you prefer to use your favorite DNS
servers, you may enter them in the space provided.
• Host name is optional. You may leave it empty if your ISP did not
provide such information.
• If you had previously registered a specific MAC address with your ISP
for Internet connections, enter the registered MAC address and make
sure you check the MAC cloning check box.
• Click <Apply> to save the dynamic IP settings.