Asus AAM6020BI-T4 User Manual
Page 37
AAM6030BI User Manual
5.4
The DSL Link LED continues to blink but does not go solid
1. This means that the DSL line is trying to train but for some reason it cannot establish a valid
connection. The main cause of this is that you are too far away from the central office. Contact
your DSL service provider for further assistance.
Common Problems and Solutions
5.5
The DSL Link LED is always off
1. Make sure you have DSL service. You should get some kind of information from your ISP which
states that DSL service is installed. You can usually tell if the service is installed by listening to
the phone line; you will hear some high-pitched noise. If you do not hear high-pitched noise,
contact your ISP.
2.
Verify that the phone line is connected directly to the wall and to the line input on the CPE. If the
phone line is connected to the phone side of the CPE or you have a splitter installed on the phone
line, the DSL light will not come on.
37
37