Asus AAM6020BI-T4 - Manual (Page 22)

AAM6030BI User Manual
Figure 11 (Management IP address)
The apply button will temporarily save this connection. To make the change permanent you need to click
on Tools (at the top of the page) and select System Commands. At the system commands page, click on
Save All.
4.5.3 Firewall/NAT Services
You can enable or disable Firewall and NAT by going to the Home screen, click setup and under LAN
Setup, select Firewall/NAT Services. By unselecting the “Enable Firewall and NAT Services” button the
firewall and NAT services is disabled for all WAN connections.
The apply button will temporarily save this connection. To make the change permanent you need to click
on Tools (at the top of the page) and select System Commands. At the system commands page, click on
Save All.
4.6 Advanced
The CPE supports a host of advanced features. For basic router functionality, the user does not need to
utilize these advanced features. The features help with routing, security, port configuration, and plug and
play capability.
22 22