Asus AAM6020BI-T4 - Manual (Page 23)

AAM6030BI User Manual
4.6.1 UPnP
UPnP NAT and Firewall Traversal allow traffic to pass-thru the router for applications using the UPnP
protocol. This feature requires one active DSL connection. In presence of multiple DSL connections, select
the one over which the incoming traffic will be present, for example the default Internet connection.
To enable UPnP, you must first have a WAN connection configured. Once a WAN connection is
configured, from the Home screen, click Advanced and under Advanced, select UPnP. This will bring up
the screen shown in Figure 12. You must enable UPnP and then select which connection will utilize
UPnP. In this case the PPPoA connection is enabled.
Figure 12 UPnP
23 23