Asus P4P800 - Manual (Page 107)

ASUS P4P800 motherboard user guide 4-33
Full Screen Logo Enabled]
This allows you to enable or disable the full screen logo display feature.
Make sure this item is enable when using the ASUS MyLogo2™ feature.
Configuration options: [Disabled] [Enabled]
Add On ROM Display Mode [Force BIOS]
Sets the display mode for option ROM. Configuration options: [Force
BIOS] [Keep Current]
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock. Configuration
options: [Off] [On]
PS/2 Mouse Support [Auto]
Allows you to enable or disable support for PS/2 mouse. Configuration
options: [Disabled] [Enabled] [Auto]
Typematic Rate [Fast]
Allows you to select the keyboard typematic rate. Configuration options:
[Slow] [Fast]
Parity Check [Disabled]
Allows you to enable or disable the memory parity error checking.
Configuration options: [Disabled] [Enabled]
Boot to OS/2 [No]
Allows you to specify the OS/2 compatibility mode. Configuration options:
[No] [Yes]
Wait for ‘F1’ If Error [Enabled]
When set to Enabled, the system waits for F1 key to be pressed when
error occurs. Configuration options: [Disabled] [Enabled]
Hit ‘DEL’ Message Display [Enabled]
When set to Enabled, the system displays the message “Press DEL to run
Setup” during POST. Configuration options: [Disabled] [Enabled]
Interrupt 19 Capture [Disabled]
When set to [Enabled], this function allows the option ROMs to trap
Interrupt 19. Configuration options: [Disabled] [Enabled]