Asus P5GZ-MX - Manual (Page 65)

ASUS P5GZ-MX 2-19
FSB/CPU External Frequency Synchronization
Front Side Bus CPU External Frequency
FSB 1066 266 MHz
FSB 800 200 MHz
FSB 533 133 MHz
DRAM Frequency [Auto]
Allows you to set the DDR2 operating frequency.
Configuration options: [Auto] [DDR2-400MHz] [DDR2-533MHz]
Selecting a very high DRAM frequency may cause the system to become
unstable! If this happens, revert to the default setting.
The following item appears only when you set the AI Overclocking item
to [Manual].
CPU Frequency [200]
Displays the frequency sent by the clock generator to the system bus. The
value of this item is auto-detected by the BIOS. The values range from 100
to 450.
Memory Voltage [Auto]
Allows you to select the memory voltage or set it to Auto for safe mode.
Configuration options: [Auto] [1.80V] [1.85V] [1.90V] [1.95V]
• Selecting a very high Memory voltage may damage the component
permanently! If this happens, revert to the default setting.
• Selecting a very low Memory voltage may cause the system to
become unstable! If this happens, revert to the default setting.
You need to install an additional graphics card and Intel Core™ 2
processor to run at FSB 1066MHz.