Asus M2V - Manual (Page 114)

5-1 Chapter 5: Software support
Serial Number View
1. From the VIA RAID BIOS utility main menu, select Serial Number
View then press .
2. From the list of channel used for IDE RAID arrays, use the arrow keys
to move the selection bar on each item. The serial number for the
selected drive is displayed at the bottom of the screen.
Create Array
Delete Array
Create/Delete Spare
Select Boot Array
Serial Number View
VIA Tech. RAID BIOS Ver 1.xx
Create a RAID array with
the hard disks attached to
VIA RAID controller
F1 : View Array/Disk Status
↑,↓ : Move to next item
Enter : Confirm the selection
ESC : Exit
Channel Drive Name Array Name Mode Size(GB) Status
Serial_Ch0 Master XXXXXXXXXXX ARRAY 0 SATA 999.99 XXXXXXX
Serial_Ch1 Master XXXXXXXXXXX ARRAY 0 SATA 999.99 XXXXXXX
Serial Number: XXXXXXXX
Serial_Ch0 Master
This option is useful for identifying same model disks.