Asus M2V - Manual (Page 110)

5-14 Chapter 5: Software support
Use arrow keys to move selection bar on items and press to
select.
7. Select Start Create Process and press to set up hard disk for
RAID system. The following confirmation message appears:
8. Press to confirm or to return to the configuration options.
9. Press to go back to main menu.
RAID 1 for data protection
1. From the create array menu, select Array Mode, then press .
The supported RAID configurations appear on a pop-up menu.
The data on the selected disks will
be destroyed. Continue? (Y/N)
4K
8K
16K
32K
64K
RAID 0 for performance
RAID 1 for data protection
RAID 0/1
RAID SPAN for capacity
RAID 1 for data protection
TIP: For server systems, use of a lower array
block size is recommended. For multimedia
computer systems used mainly for audio and
video editing, a higher array block size is
recommended for optimum performance.
4. Press to confirm or to return to the configuration options. If
you selected , proceed to step 9.
5. Select Select Disk Drives, then press . Use arrow keys
to select disk drive, then press to mark selected drive. An
asterisk appears before a selected drive.
6. Select Block Size, then press to set array block size. A list of
valid array block sizes are displayed on a pop-up menu.
2. Select RAID 1 for data protection then press .