Asus Vintage-AE1 User Manual

Page 90

5 - 3 0

C h a p t e r 5 : B I O S s e t u p

5.6.2

Boot Settings Configuration

Boot Settings Configuration

Quick Boot

[Enabled]

Full Screen Logo

[Enabled]

AddOn ROM Display Mode

[Force BIOS]

Bootup Num-Lock

[On]

PS/2 Mouse Support

[Auto]

Wait For ‘F1’ If Error

[Enabled]

Hit ‘DEL’ Message Display

[Enabled]

Interrupt 19 Capture

[Disabled]

Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.

Set this item to [Enabled] to use the ASUS MyLogo2™ feature.

5.6.1

Boot Device Priority

1st ~ xxth Boot Device [1st Floppy Drive]

These items specify the boot device priority sequence from the available
devices. The number of device items that appears on the screen depends
on the number of devices installed in the system.
Configuration options: [1st Floppy Drive] [xxxxx Drive] [Disabled]

Boot Device Priority

1st Boot Device

[1st FLOPPY DRIVE]

2nd Boot Device

[PM-ST330620A]

3rd Boot Device

[PS-ASUS CD-S360]

Quick Boot [Enabled]

Enabling this item allows the BIOS to skip some power on self tests (POST)
while booting to decrease the time needed to boot the system. When set
to [Disabled], BIOS performs all the POST items.
Configuration options: [Disabled] [Enabled]

Full Screen Logo [Enabled]

This allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]