Asus MA3850 Series - Manual (Page 45)

ASUS Splendid HD graphics card 39
Setting other features
To enable or disable the autorun feature, alarm, use of multi-devices and/or set the
detecting delay:
• Click the Enable alarm check box to enable or disable the alarm feature.
When this item is enabled, VideoSecurity Online can alert user when
VideoSecurity Online detects any unusual condition. Before use this option,
make sure your PC has properly installed a sound card.
• Click the Enable multi-devices check box to enable or disable the alarm
feature. This option allows you to switch to single device mode or double
devices mode for VideoSecurity Online.
• Click the Delay detecting for XXX seconds check box to
enable or disable the delay feature when a motion is detected. Key in or click
the arrows to set the delay (in seconds).
• Click the Autorun detect when program run check box to
enable or disable the autorun feature of ASUS VideoSecurity. When this
item is enabled, VideoSecurity Online will auto-run when system boots. This
option is helpful when you use remote control over your computer.
Setting the detection region
To set the detect region, click the Detect Region option buttons.
If you select Full Window, VideoSecurity Online will monitor the whole visible
area. If you select User Defined Region, VideoSecurity Online will only detect
changes within the specific region you set. The default value is Full window.