Asus MA3850 Series - Manual (Page 44)

ASUS Splendid HD graphics card 38
• Temperature and lighting may affect monitoring.
• The quality of the video capture device is also very important in
setting the sensibility.
• Test different values to fine-tune this parameter for optimum performance.
Setting the detecting interval parameter
To set the detecting interval parameter:
Move the Detecting interval slider. The interval (times/sec) or scan rate has four
configuration options: 1 times/sec, 2 times/sec, 3 times/sec and 4 times/sec.
- OR -
Click Default to set the recommended scan rate.
The default value of Detecting interval is 2 frames/sec. The higher the scan rate
is, the more accuracy the detection could be, the more CPU usage you need.
If you want VideoSecurity Online and other applications (like Office, network)
to run simultaneously, choose a lower scan rate to release CPU usage to other
applications.
Set to a higher scan rate for a more accurate detection.
Do not change the working directory name while ASUS VideoSecurity is
running. Doing so will cause a runtime error!
Setting the working directory
To set the working directory:
Key in the working directory on the textbox or click Browse to locate and set the
working directory.
The default working directory is C:\VideoSec, if Windows roots in disk C. Everytime
you launch ASUS VideoSecurity, a new folder is created. The folder filename
indicates the current time and date the application was launched. For example,
“2005.06.16_04.20.10” means that ASUS VideoSecurity was launched on June 06,
2005 at 4:20:10 AM.