Asus Z87-K - Manual (Page 23)

ASUS Z87-K 1-15
5. USB 2.0 connectors (10-1 pin USB 78, USB1112, USB1314)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specifications and supports up to
480Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB 2.0 module is purchased separately.
Z87-K
Z87-K USB2.0 connectors
USB+5V USB_P7- USB_P7+ GND NC
USB+5V USB_P8- USB_P8+
GND
USB78
PIN 1
USB+5V USB_P11- USB_P11+ GND NC
USB+5V
USB_P12- USB_P12+
GND
USB1112
PIN 1
USB+5V USB_P13- USB_P13+ GND NC
USB+5V
USB_P14- USB_P14+
GND
USB1314
PIN 1
4. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
• We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard’s high-definition audio capability.
• If you want to connect a high-definition front panel audio module to this connector,
set the Front Panel Type item in the BIOS setup to [HD]. If you want to connect an
AC’97 front panel audio module to this connector, set the item to [AC97]. By default,
this connector is set to [HD]. See section 2.6.7 Onboard Devices Configuration for
details.
Z87-K
Z87-K Front panel audio connector
AAFP
AGND NC SENSE1_RETUR SENSE2_RETUR
PORT1 L PORT1 R PORT2 R
SENSE_SEND
PORT2 L
HD-audio-compliant
pin definition
PIN 1
AGND NC NC NC
MIC2
MICPWR
Line out_R
NC
Line out_L
Legacy AC’97
compliant definition