Asus A88X-PRO - Manual (Page 40)

2-20 Chapter 2: Hardware information
Chapter 2
2. TPU (GPU Boost) switch
Turning this switch to Enable will automatically optimize the system for fast, yet stable
clock speeds.
• To ensure system performance, turn the switch setting to Enable when the system is
powered off.
• When the TPU switch is set to Enable, it can be used as a GPU Boost switch.
• The TPU LED near the TPU switch lights when the switch setting is turned to Enable. Refer
to section 2.2.7 Onboard LEDs for the exact location of the TPU LED.
• If you change the switch setting to Enable under the OS environment, the TPU function
will be activated after the next system bootup.
• You may use the TurboV and Auto Tuning feature in the TurboV EVO application, adjust
the BIOS setup program, or enable the TPU switch at the same time. However, the system
will use the last setting you have made.
A88X-PRO
A88X-PRO TPU switch
TPU
3. EPU switch
This switch allows you to enable or disable the EPU function.
A88X-PRO
A88X-PRO EPU switch
EPU
To ensure system performance, turn the switch setting to Enable when the system is
powered off.