Asus ASMB6-iKVM - Manual (Page 78)

4-16 Chapter 4: Web-based user interface
Alert Policy Tab
This page is used to configure the Alert Policy and LAN destination. You can add,
delete or modify an entry in this page.
The fields of PEF Management – Alert Policy Tab are explained below.
1. Policy Entry #: Displays Policy entry number for the newly configured entry
(read-only).
2. Policy Number: Displays the Policy number of the configuration.
3. Policy Configuration: To enable or disable the policy settings.
4. Policy Set: To choose any one of the Policy set values from the list.
0 - Always send alert to this destination.
1 - If alert to previous destination was successful, do not send alert to this
destination. Proceed to next entry in this policy set.
2 - If alert to previous destination was successful, do not send alert to this
destination. Do not process any more entries in this policy set.
3 - If alert to previous destination was successful, do not send alert to this
destination. Proceed to next entry in this policy set that is to a different
channel.
4 - If alert to previous destination was successful, do not send alert to this
destination. Proceed to next entry in this policy set that is to a different
destination type.
5. Channel Number: To choose a particular channel from the available channel
list.
6. Destination Selector: To choose a particular destination from the configured
destination list.
LAN Destination has to be configured - under Configuration->PEF->LAN
Destination.