Asus ASMB6-iKVM - Manual (Page 21)

ASUS ASMB6-iKVM 2-3
4. When installed, the board appears
as shown.
5. Insert the LAN cable plug to the LAN port for server management.
Refer to the Appendix for the location of the LAN port for server management.
6. For direct LAN configuration, connect the other end of the LAN cable to the
local/central server LAN port.
For connection to a network hub or router, connect the other end of the LAN
cable to the network hub or router.
7. Ensure the VGA, USB, PS/2 cables are corrected, then connect the power
plug to a grounded wall socket.
Everytime after the AC power is re-plugged, you have to wait for about 60
seconds for the system power up.
3. Press the board firmly until it is
completely seated in place.