Asus TUEP2-M - Manual (Page 18)

18
3. HARDWARE SETUP
ASUS TUEP2-M User’s Manual
Motherboard Settings
3. H/W SETUP
Motherboard Feature Settings
The motherboard’s onboard functions are either adjusted through jumpers or DIP
switches. When using DIP switches, the white block represents the switch’s position.
The example below shows all the switches in the OFF position.
1) JumperFree™ Mode (JEN)
This jumper allows you to enable or disable the JumperFree™ mode. The
JumperFree™ mode allows processor settings to be made through the BIOS
setup (see 4.4 Advanced Menu).
NOTE: In JumperFree™ mode, all dip switches must be set to OFF.
Setting JEN
Disable (Jumper) [1-2]
Enable (JumperFree) [2-3] (default)
TUEP2-M
®
1. Frequency Selection
2. Frequency Selection
3. Frequency Selection
4. Frequency Selection
5. Frequency Selection.
TUEP2-M DIP Switches
DSW
ON OFF
ON 12345
TUEP2-M
®
TUEP2-M JumperFreeª Mode Setting
JEN
DSW
ON 12345
OFF
Disable
1 2
Enable
(default)
2 3