beautypg.com

5 onboard devices configuration, High definition audio [enabled, Onboard 1394 controller [enabled – Asus P5E-V HDMI User Manual

Page 97: Onboard pcie gbe lan [enabled, J-micron pata controller [enabled, Serial port1 address [3f8/irq4, Parallel port address [378, Configuration options: [enabled] [disabled

background image

ASUS P5E-V HDMI

4-25

4.4.5

OnBoard Devices Configuration

Select Screen

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.

Onboard Device Configuraiton

High Definition Audio

[Enabled]

Front Panel Type

[HD Audio]

Onboard 1394 Controller

[Enabled]

Onboard PCIE GbE LAN

[Enabled]

LAN Option ROM

[Disabled]

J-Micron PATA Controller

[Enabled]

Serial Port1 Address

[3F8/IRQ4]

Parallel Port Address

[378]

Parallel Port mode

[ECP]

ECP Mode DMA Channel

[DMA3]

Parallel Port IRQ

[IRQ7]

BIOS SETUP UTILITY

Advanced

High Definition Audio [Enabled]

Allows you to enable or disable the High Definition Audio. The following item

appears only when you enable this item.

Configuration options: [Enabled] [Disabled]

Front Panel Type [HD Audio]

Allows you to set the front panel audio connector (AAFP) mode to legacy

AC’97 or high-definition audio depending on the audio standard that the front

panel audio module supports. Configuration options: [AC97] [HD Audio]

Onboard 1394 Controller [Enabled]

Allows you to disable or enable the onboard 1394 device support.

Configuration options: [Enabled] [Disabled]

Onboard PCIE GbE LAN [Enabled]

Configuration options: [Enabled] [Disabled]

LAN Option ROM [Disabled]

This item appears only when you enable the previous item.

Configuration options: [Disabled] [Enabled]

J-Micron PATA Controller [Enabled]

Configuration options: [Enabled] [Disabled]

Serial Port1 Address [3F8/IRQ4]

Allows you to select the Serial Port1 base address.

Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]

Parallel Port Address [378]

Allows you to select the parallel port address.

Configuration options: [Disabled] [378] [278] [3BC]

Options

Disabled

Enhanced