Entering the nvidia, Raid utility – Asus P5N-T Deluxe User Manual
Page 151
ASUS P5N-T Deluxe
5-37
• For detailed descriptions on the NVIDIA
®
RAID configuration, refer to the
“NVIDIA
®
RAID User Guide” found in your motherboard Support DVD.
• When using Windows
®
XP operating system, make sure to install the
Windows
®
XP Service Pack 2 or later versions.
Make sure to re-enter your NVRAID settings after the CMOS is cleared; otherwise,
the system will not recognize your RAID setup.
Entering the NVIDIA
®
RAID utility
To enter the NVIDIA
®
RAID utility:
1. Boot up your computer.
2. During POST, press
The RAID BIOS setup screens shown in this section are for reference only, and
may not exactly match the items on your screen.
[F6] Back [F7] Finish [TAB] Navigate [↑↓] Select [ENTER] Popup
At the bottom of the screen are the navigation keys. These keys allow you to move
through and select menu options.
NVIDIA RAID Utility Oct 5 2004
- Define a New Array -
RAID Mode:
Striping
Striping Block:
Optimal
Free Disks
Array Disks
Loc Disk Model Name
Loc Disk Model Name
1.0.M XXXXXXXXXXXXXXXXXX
1.1.M XXXXXXXXXXXXXXXXXX
[→] Add
2.0.M XXXXXXXXXXXXXXXXXX
2.1.M XXXXXXXXXXXXXXXXXX
[←] Del