Asus RX3041 - Manual (Page 7)

RX3041 Router User's Manual
6
1.4 System Requirements
•
One or more PCs (desktop or notebook) with Ethernet
interface.
•
TCP/IP protocol must be installed on all PCs.
•
Have valid Internet Access account and a DSL or cable
modem.
•
10/100BaseT network cables with RJ-45 connectors.
•
System with MS Internet Explorer ver. 5.0 or later, or
Netscape Navigator ver. 4.7 or later.
1.5 Installation Instruction
1) Power off the router and DSL/cable modem.
2) Connect systems to the LAN ports on the router with
straight LAN cables.
3) Connect the DSL or cable modem to the WAN port on the
router.
4) Power on DSL or cable modem first, then connect power
adapter to the power jack on the router and plug the power
cable into an outlet.
5) Check LEDs.
a) Once power on the router, Power LED should be on.
b) LAN LED should be on for each active LAN connection.
c) The WAN LED should be on when the DSL or cable
modem is connected.