Asus P8Z77-V - Manual (Page 83)

ASUS P8Z77-V 3-11
Chapter 3
VRM Spread Spectrum [Disabled]
This item appears only when you set the Frequency item to [Auto] and allows you to enable
the spread spectrum to enhance system stability.
CPU Power Phase Control [Auto]
Allows you to control the power phase based on the CPU’s demands.
Configuration options: [Auto] [Standard] [Optimized] [Extreme] [Manual Adjustment]
DO NOT remove the thermal module when switching to Extreme and Manual Mode. The
thermal conditions should be monitored.
CPU Power Duty Control [T.Probe]
DIGI + VRM Duty control adjusts the current and thermal conditions of every component’s
phase.
Configuration options: [T. Probe] - Select to maintain the VRM thermal balance.
[Extreme] - Select to maintain the current VRM balance.
CPU Current Capability [100%]
Allows you to configure the total power range, and extends the overclocking frequency range
simultaneously.
Configuration options: [100%] [110%] [120%] [130%] [140%]
Choose a higher value when overclocking, or under a high CPU loading for extra power
support.
CPU Power Thermal Control [Auto]
Allows you to configure the temperature range for overclocking tolerance.
Configuration options: [Auto] [Regular] [High] [Extreme]
CPU Power Response Control [Auto]
Allows you to configure the power response rate for CPU. Higher value for extreme
overclocking.
Configuration options: [Regular]: 100 [Medium]: 150 [High]:200 [Ultra High]: 250
iGPU Load-line Calibration [Auto]
Allows you to set the iGPU Load-line Calibration.
Configuration options: [Auto] [Regular] [High] [Extreme]