Asus E35M1-M PRO - Manual (Page 51)

Chapter 2: BIOS information 2-17
Cool ‘n’ Quiet [Enabled]
Enables or disables the AMD ® Cool ‘n’ Quiet technology. Configuration options: [Enabled]
[Disabled]
NX Mode [Enabled]
Enables or disables no-execute page protection function. Configuration options: [Disabled]
[Enabled]
SVM Mode [Enabled]
Enables or disables CPU virtualization. Configuration options: [Disabled] [Enabled]
C6 Mode [Enabled]
Enables or disables C6 mode. Configuration options: [Enabled] [Disabled]
2.5.2 SATA Configuration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Not Present if no SATA device is installed to the corresponding SATA
port.
OnChip SATA Channel [Enabled]
Enables or disables onboard channel SATA port. Configuration options: [Disabled] [Enabled]
OnChip SATA Type [IDE]
Allows you to set the SATA configuration.
[IDE]
Set to [IDE] when you want to use the Serial ATA hard disk drives as
Parallel ATA physical storage devices.
[AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the AHCI
(Advanced Host Controller Interface). The AHCI allows the onboard storage
driver to enable advanced Serial ATA features that increases storage
performance on random workloads by allowing the drive to internally
optimize the order of commands.
OnChip SATA Speed [Auto]
[Auto] Allows the system to select the speed automatically.
[SATA 3.0Gb/s] Select this option when using SATA 3.0Gb/s devices.
[SATA 6.0Gb/s] Select this option when using SATA 6.0Gb/s devices.