beautypg.com

Chapter 3 – Asus Z87-PRO(V EDITION) User Manual

Page 97

background image

ASUS Z87-PRO (V EDITION)

3-17

Chapter 3

CPU Power Thermal Control [130]

A higher temperature brings a wider CPU power thermal range and extends the

overclocking tolerance to enlarge the O.C. potential. Use the <+> or <-> keys to adjust

the value. The values depend on the CPU installed.

DO NOT remove the thermal module. The thermal conditions should be monitored.

DRAM Current Capability [100%]

A higher value brings a wider total power range, and extends the overclocking range

simultaneously.

Configuration options: [100%] [110%] [120%] [130%]

DRAM Voltage Frequency [Auto]

Allows you to adjust the DRAM switching frequency. Assign a fixed high DRAM

frequency to increase the O.C. range, or a low DRAM frequency for a better system

stability.

Configuration options: [Auto] [Manual]

The following item appears only when you set set the DRAM Frequency Mode item to

[Manual].

DRAM Fixed Frequency Mode [300]

Allows you to set a fixed DRAM frequency to increase the overclocking

range or a low DRAM frequency for better system stability. Use the <+> or

<-> keys to adjust the value. The values range from 300kHz to 500kHz with

a 50kHz interval.

DRAM Power Phase Control [Auto]

[Auto]

Allows you to set the Auto mode.

[Optimized]

Allows you to set the ASUS optimized phase tuning profile.

[Extreme]

Allows you to set the full phase mode.

CPU Power Management

The subitems in this menu allow you to set the CPU ratio and their features.
Enhanced Intel SpeedStep Technology [Enabled]

Allows the operating system to dynamically adjust the processor voltage and cores

frequency, resulting to a decreased average power consumption and decreased

average heat production.

Configuration options: [Disabled] [Enabled]

Turbo Mode [Enabled]

Allows you to enable your core processor’s speed to run faster than the base operating

frequency when it is below operating power, current and temperature specification limit.

Configuration options: [Disabled] [Enabled]

The following items appear only when you set the Turbo Mode to [Enabled].