beautypg.com

Chapter 3 – Asus Z87-PRO(V EDITION) User Manual

Page 91

background image

ASUS Z87-PRO (V EDITION)

3-11

Chapter 3

If you assign a value for 2-Core Ratio Limit, do not set the 1-Core Ratio Limit to [Auto].

3-Core Ratio Limit [Auto]

Select [Auto] to apply the CPU default Turbo Ratio setting or manually

assign a 3-Core Limit value that must be higher than or equal to the 4-Core

Ratio Limit.

If you assign a value for 3-Core Ratio Limit, do not set the 1-Core Ratio Limit and 2-Core

Ratio Limit to [Auto].

4-Core Ratio Limit [Auto]

Select [Auto] to apply the CPU default Turbo Ratio setting or manually

assign a 4-Core Limit value that must be higher than or equal to the 3-Core

Ratio Limit.

If you assign a value for 4-Core Ratio Limit, do not set the 1-Core Ratio Limit, 2-Core Ratio

Limit, and 3-Core Ratio to [Auto].

Min CPU Cache Ratio [Auto]

Allows you to set the minimum possible ratio on the Uncore part of the processor. Use the

<+> or <-> keys to adjust the value. The values depend on the CPU installed.

Max CPU Cache Ratio [Auto]

Allows you to set the maximum possible ratio on the Uncore part of the processor. Use the

<+> or <-> keys to adjust the value. The values depend on the CPU installed.

Internal PLL Overvoltage [Auto]

Allows you to enable the internal PLL Overvoltage for K-SKU CPUs to get the extreme

overclocking capability.
Configuration options: [Auto] [Enabled] [Disabled]

CPU bus speed : DRAM speed ratio mode [Auto]

Allows you to set the CPU bus speed to DRAM speed ratio mode.
[Auto]

DRAM speed is set to the optimized settings.

[100:133]

The CPU bus speed to DRAM speed ratio is set to 100:133.

[100:100]

The CPU bus speed to DRAM speed ratio is set to 100:100.

Memory Frequency [Auto]

Allows you to set the memory operating frequency. The configuration options vary with the

BCLK/PCIE Frequency item settings.

CPU Graphics Max. Ratio [Auto]

[Auto]

Allows you to automatically optimize the CPU Graphics Ratio depending on

the system loading.

[Manual]

Allows you to set a value for an optimal CPU Grapics Ratio. Use the <+> or

<-> keys to adjust the CPU graphics ratio. The minimum value depends on

the installed CPU.