7 apm, 8 network stack, Apm -22 – Asus P8H61-I R2.0 User Manual
Page 54: Network stack -22

2-22
ASUS P8H61-I R2.0
2.5.7
APM
Restore AC Power Loss [Power Off]
[Power On]
The system goes into on state after an AC power loss.
[Power Off]
The system goes into off state after an AC power loss.
[Last State]
The system goes into either off or on state, whatever the system state was
before the AC power loss.
Power On By PCIE [Disabled]
[Disabled]
Disables the PCIE devices to generate a wake event.
[Enabled]
Enables the PCIE devices to generate a wake event.
Power On By RTC [Disabled]
[Disabled]
Disables RTC to generate a wake event.
[Enabled]
When set to [Enabled], the items RTC Alarm Date (Days) and Hour/
Minute/Second will become user-configurable with set values.
2.5.8
Network Stack
Network Stack [Disable Link]
Enables or disables the UEFI network stack. Configuration options: [Disable Link] [Enable]
The following two items appear only when you set the Network Stack item to [Enable].
Ipv4 PXE Support [Enabled]
This item allows users to disable or enable the Ipv4 PXE Boot support. Configuration
options: [Disable Link] [Enable]
Ipv6 PXE Support [Enabled]
This item allows users to disable or enable the Ipv6 PXE Boot support. Configuration
options: [Disable Link] [Enable]