Asus M2N68 User Manual

Page 48

2-4

Chapter 2: BIOS setup

(2) Enter BIOS setup program. Go to the Tools menu to select EZ Flash2

and press to enable it.

You can switch between drives by pressing before the correct file

is found. Then press .

4. When the correct BIOS file is found, EZ Flash 2 performs the BIOS update

process and automatically reboots the system when done.

• This function can support devices such as USB flash disk, or floppy disk

with FAT 32/16 format and single partition only.

• DO NOT shut down or reset the system while updating the BIOS to prevent

system boot failure!