Asus Rampage III Gene - Manual (Page 112)

3-38 Chapter 3: BIOS setup
CPU Q-Fan Control [Disabled]
Allows you to enable or disable the CPU fan controller.
[Disabled] Disables the CPU Q-fan controller.
[Enabled] Enables the CPU Q-fan controller.
The CPU Fan Profile item appears when you enable the CPU Fan Control
feature.
CPU Fan Profile [Standard]
This item appears only when you enable the CPU Q-Fan Control feature and allows
you to set the appropriate performance level of the CPU fan.
[Standard] Sets to [Standard] to make the CPU fan automatically adjust
depending on the CPU temperature.
[Silent] Sets to [Silent] to minimize the fan speed for quiet CPU fan operation.
[Turbo] Set to [Turbo] to achieve maximum CPU fan speed.
Chassis Q-Fan Control [Disabled]
Allows you to enable or disable the Chassis fan controller.
[Disabled] Disables the Chassis Q-fan controller.
[Enabled] Enables the Chassis Q-fan controller.
Rampage III GENE BIOS SETUP Version 0213
Power
Fan Speed Control
CPU Q-Fan Control [Disabled]
Chassis Q-Fan Control [Disabled]
OPTFan1 Control [Disabled] [Disabled]
Disable/Enable
Q-Fan functions of
CPU fan
Fan Speed Monitor
CPU FAN; Chassis FAN1/2; POWER Fan Speed
OPT FAN1 Speed [xxxxRPM] or [Ignored] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU
fan, chassis fan, power fan, and optional fan speed in rotations per minute
(RPM). If any of the fans is not connected to the motherboard, the field shows
[N/A]. These items are not user-configurable.
Fan Speed Control