Asus P4P800-E Deluxe - Manual (Page 51)

ASUS P4P800-E Deluxe motherboard 2-29
P4P800-E
®
P4P800-E SATA RAID Connectors
GND
RSA
T A_TXP2
RSA
T
A_TXN2
GND
RSA
T A_RXP2
RSA
T A_RXN2
GND
SATA_RAID1
GND
RSA
T A_TXP1
RSA
T A_TXN1
GND
RSA
T
A_RXP1
RSA
T A_RXN1
GND
SATA_RAID2
5. Serial ATA RAID connectors (7-pin SATA_RAID1, SATA_RAID2)
These Serial ATA connectors support SATA hard disks that you may
configure as a RAID set. Through the onboard Promise
® PDC20378
RAID controller, you may create a RAID 0, RAID 1, RAID 0+1, or multi-
RAID configuration together with the RAID ATA133 connector. See
Chapter 5 for details on RAID configuration.
1. If you wish to create a RAID set, make sure that you have
connected the Serial ATA cable and installed Serial ATA devices.
You cannot enter the SATARaid™ utility and SATA BIOS setup
during POST if there are no connected Serial ATA devices.
2. The Promise ® PDC20378 RAID controller does not support ATAPI
devices such as CD-ROMs, DVD-ROMs, etc.