beautypg.com

7 system memory, 1 overview, 2 memory configurations – Asus M4A87TD EVO User Manual

Page 21

background image

1.7

System memory

1.7.1

Overview

The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules

(DIMM) sockets. A DDR3 module has the same physical dimensions as a DDR2 DIMM but

is notched differently to prevent installation on a DDR2 DIMM socket. DDR3 modules are

developed for better performance with less power consumption. The figure illustrates the

location of the DDR3 DIMM sockets:

Channel

Sockets

Channel A

DIMM_A1 and DIMM_B1

Channel B

DIMM_A2 and DIMM_B2

1.7.2

Memory configurations

You may install 1GB, 2GB and 4GB unbuffered ECC/non-ECC DDR3 DIMMs into the DIMM

sockets.

• You may install varying memory sizes in Channel A and Channel B. The system maps

the total size of the lower-sized channel for the dual-channel configuration. Any excess

memory from the higher-sized channel is then mapped for single-channel operation.

• Always install DIMMs with the same CAS latency. For optimum compatibility, we

recommend that you obtain memory modules from the same vendor.

• Due to the memory address limitation on 32-bit Windows OS, when you install 4GB

or more memory on the motherboard, the actual usable memory for the OS can be

about 3GB or less. For effective use of memory, we recommend that you install a 64-bit

Windows OS when having 4GB or more memory installed on the motherboard.

• Due to CPU spec., AMD 100 and 200 series CPUs support up to DDR3 1066MHz. With

ASUS Design, this motherboard can support up to DDR3 1333MHz.

• When overclocking, some AMD CPU models may not support DDR3 1600 or higher

frequency DIMMs.

• This motherboard does not support DIMMs made up of 512Mb (64MB) chips or less

(Memory chip capacity counts in Megabit, 8 Megabit/Mb = 1 Megabyte/MB).

• The default memory operation frequency is dependent on its Serial Presence Detect

(SPD), which is the standard way of accessing information from a memory module.

Under the default state, some memory modules for overclocking may operate at a

lower frequency than the vendor-marked value. To operate at the vendor-marked or at a

higher frequency, refer to section 2.5 Ai Tweaker menu for manual memory frequency

adjustment.

• For system stability, use a more efficient memory cooling system to support a full

memory load (4 DIMMs) or overclocking condition.

Chapter 1: Product introduction

1-9