Asus M2N68-AM - Manual (Page 60)

2-16 Chapter 2: BIOS setup
2.3.4 IDE Configuration
The items in this menu allow you to set or change the configurations for the IDE
devices installed in the system. Select an item then press if you wish to
configure the item.
Onboard IDE Controller [Enabled]
Allows you to enable or disable the onboard IDE controller.
Configuration options: [Enabled] [Disabled]
Serial-ATA Devices [Enabled]
Allows you to disable or set the Serial-ATA devices.
Configuration options: [Enabled] [Disabled]
SATA Mode select [SATA Mode]
Allows you to select the SATA Mode. Configuration options: [SATA Mode] [RAID
Mode]
The following two items appear only when the SATA Mode select item is set to
[RAID Mode].
SATA1/SATA2 [Disabled]
Allows you to disable or enable the SATA1/SATA2.
Configuration options: [Enabled] [Disabled]
SATA3/SATA4 [Disabled]
Allows you to disable or enable the SATA3/SATA4.
Configuration options: [Enabled] [Disabled]
IDE Configuration
Onboard IDE Controller [Enabled]
Serial-ATA Devices [Enabled]
SATA Mode select [SATA Mode]
Disabled: disables
the integrated IDE
Controller.
Enabled: enable
the integrated IDE
Controller.