beautypg.com

AEG DI7490-M User Manual

Page 24

background image

USE

24

USE

BUTTON

DISPLAY

FUNCTIONS

A

Displays the set speed

Turns the suction motor on and off

B

Displays the set speed

Decreases the speed of the motor

V3 V2 V1

C

Displays the set speed

Increases the speed of the motor

V1 V2 V3

D

Displays

HI The spot flashes

Starts maximum suction speed. After 5 minutes the speed will return

automatically to the one set before. This function can be deactivated

by pressing the button again (the decimal point at the centre of the

display will flash).

E

Displays the time remaining before

the hood turns off (countdown)

and the Set speed. The spot at the

bottom right flashes

Enables automatic delayed shutdown of the appliance (Delay), with a

delay that depends on the working speed set.

Speed 1 delay 20 minutes

Speed 2 delay 15 minutes

Speed 3 delay 10 minutes

The proposed delay time can be changed by pressing the button succes-

sively and selecting one of the options available (5, 10, 15, 20, 25 and

30 minutes). At the end of the time selected the appliance will turn off

automatically. To deactivate this function, simply press the button until

the option selected is 0 or turn the motor off.

F

Turns the hob lighting system on and off

Displays

F

Indicates the need to wash the metal grease filters. The alarm is triggered

after the Hood has been in operation for 100 working hours. This indication

is only visible when the motor is turned off. To reset the alarm:

Turn the motor off and press button

D for approximately 3 seconds,

until the display turns off.

Displays

C

Indicates the need to change the activated charcoal filters, and also to

wash the metal grease filters. The alarm is triggered after the Hood has

been in operation for 200 working hours. This indication is only visible

when the motor is turned off. This indication must be activated following

the procedure described in the section on maintenance of the activated

charcoal filter. To reset the alarm:

Turn the motor off and press button

D for approximately 3 seconds,

until the display turns off.