Theatre Solution Teatro Auditorium Seating - Manual (Page 7)

6 Planning, Installation & Specification Manual Teatro Auditorium Seating
The Teatro Series
Teatro Features
•
Gravity seat mechanism insures that the seat will always quietly return to a consistent vertical position.
•
Hardwood armrests are available in a variety of species and finishes.
•
Durable powder-coat finish is standard on all steel components.
•
Flush mounted floor attachment hardware is standard.
•
Standard spacing is 19”, 20”, 21” and 22” c.c. of frames (19” not available with tablet arm).
•
Lifetime Warranty is standard on the Teatro.
Teatro Options
The Teatro chair is available with many options. Choose the options that are appropriate for the project.
End Panels Stained to match the armrests, veneer end panels can enhance the visual appeal of the room. Due
to the simplicity of the Teatro leg design, customized end panel profiles and options are easily accommodated.
Aisle Lights Low-voltage (24v) aisle lights discreetly illuminate dark aisles and steps, enhancing safety and
visual appeal. Aisle lights can be concealed in the underside of the arm cap, or installed in the end panel. Wiring
is routed through the frame to provide a clean installation.
Seat & Row Identification and Donor Tags Seat & row identification plates and donor tags are available in a
variety of shapes and finishes. Identification plates are recessed into the wood seat and armrest to achieve a
flush, clean appearance, and in order to resist tampering.
Tablet Arms The tablet arm folds between the seat and armrest and provides a work area for the occupant.
Tablet arms are available as either left or right-handed.
Power/Data Popular with corporate training and educational facilities, the power/data ready frames allow for
distribution of networked communications and 120 volt power directly to each chair, allowing laptops to be
connected to the building’s internal computer and power distribution networks.
California Technical Bulletin 133 Fire Code Compliance (when required by local codes)
Removable Chairs Available as one, two, or three chairs, these units include a steel sled-base and can conform
to the row radii so as to provide harmony with the design of the room, while maintaining the utmost in flexibility.
Removable chairs are available with a standard base that allows them to be bolted to the floor quickly and easily,
or an extended base that allows them to be completely freestanding without the need for physical attachment to
the floor.
Air Diffuser Pedestal One of the few chairs available with an air diffuser pedestal frame, this innovative feature
provides efficient distribution of heating and cooling by allowing air flow through the pedestal base.
Riser Mount Frames As an option to the traditional floor mounting of chair frames, riser mount frames are
available. This gives architects and designers another mounting option, which allows for easier cleaning of the
floors.
Transfer Arms Designed to comply with the Americans with Disabilities Act, these unique frames allow easy and
clear access to the seat. Installations without an end panel feature a hinged lift-up armrest while installations with
end panels feature removable end panels.
Oversize Chair Widths Chair widths of 23” and 24” c.c. are available to provide occupants with a higher level of
comfort and to satisfy layout requirements.
Bookracks Available to meet the specific requirements for book storage, TSI provides project specific solutions.