Theatre Solution Tier Loose Seating User Manual
Page 9
Tier Loose Seating Specifications
9
2.3 FABRICATION, GENERAL (cont.)
C.
Assembly: The chair frame is assembled with aliphatic resin glue and clamped to allow total curing of the
joints. All excess glue residue is to be removed prior to hardening. Corner blocks are to be glued in place
during assembly to insure a square and plumb assembly.
D.
Finishing: All surfaces are to be sanded with a series of sandpaper starting at 120 grit and finishing with a
white wood sanding at 220 grit. All sharp edges shall be smoothed, all machining and tool marks are to be
removed, and the affected areas blended into the surrounding areas. All surfaces are to be stained and
sealed. Prior to the final topcoat, a light sanding with 320 grit sandpaper to remove foreign particles from
the sealer coat is to be performed. A final topcoat of catalyzed lacquer is to be applied to all exposed
surfaces.