Theatre Solution Tier Loose Seating - Manual (Page 7)

Tier Loose Seating Specifications 7
Tier Specifications – Loose Seating
PART 1 – GENERAL
1.1 RELATED DOCUMENTS
A. Drawings and general provisions of the contract, including General and Supplementary Conditions, apply to
this section.
1.2 SUMMARY
A. This section includes the following:
1. Freestanding chairs with hardwood frame and upholstered seat and back cushions.
1.3 SUBMITTALS
A. Product data for each type of product specified.
B. Samples for initial selection purposes in the form of manufacturer’s color charts or samples of materials
showing the full range of standard colors, finishes, and patterns.
1. Fabric
2. Wood finishes.
C. Statement signed by the seating manufacturer confirming that the products submitted comply with the
specified requirements.
1.4 QUALITY ASSURANCE
A. Provide installer’s qualifications confirming the installer is qualified to install the manufacturer’s chairs.
B. Provide seating that complies with California Technical Bulletin 117.
C. Obtain each type of seating, including accessories and mounting components, from a single manufacturer.
1.5 PROJECT CONDITIONS
A. Environmental Conditions: Do not install seating until space is enclosed and weatherproof, wet work in
space is complete and dry, installation of finishes including painting is complete, and ceilings are complete.
Do not install seating until ambient temperature and humidity conditions are continuously maintained at
final occupancy values.
1.6 DELIVERY, STORAGE, AND HANDLING
A. Deliver seating in manufacturer’s unopened cartons clearly labeled with manufacturer’s name and
contents.
B. Handle seating in manner to prevent damage.
1.7 EXTRA MATERIALS
A. Furnish from the same production run as the materials installed. Package materials with protective
covering and identify with labels describing contents.