Dayton Audio RS621CMK Speaker Kit Pair Curved Maple - Manual (Page 2)

Introduction
Your Dayton RS621 speaker kit has been designed to provide you with the basics of speaker design and
construction. After completing the assembly, your RS621 speakers will provide you with a pair of speakers that are
compact in size yet are BIG on sound. The RS621 kit uses two of the most popular Dayton Reference Series
products; the RS28AS-4 1-1/8" Shielded Aluminum Dome Tweeter and the 8 Ohm Dayton RS150S-8 6" Reference
Series Shielded Woofer. The tweeter is matched sonically to the woofer resulting in sound that rivals more
expensive speakers. When your kit is fully assembled and your speakers are operational it will provide you with the
deep satisfaction of knowing you "built it yourself".
Parts Inventory
Before beginning the assembly process, please inspect and confirm that you have all necessary components.
If you appear to be missing any components, please contact your place of purchase immediately.
Part # Qty Description
TW-0.25(C) 1 .25 cu. ft. 2-way Cabinet Pair
BAFFLE 2 Custom baffle (attached to cabinet)
T-XOVER 2 Crossover Boards Tweeter
W-XOVER 2 Crossover Boards Woofer
MANUAL 1 Instruction Manual
WIRE14RB6 1 14 Awg Red/black Zip Cord 6 Ft.
BPA-38G 2 HD Binding Post Pair Goldl
FOAM 1 1-1/2" x 24" x 18" Acoustic foam
PANS634 20 #6 X 3/4" Deep Thread Pan Head Screws
RS28AS-4 2 Dayton Reference 1-1/8" Shielded Aluminum Dome Tweeter
RS150S-8 2 Dayton Reference 6" Shielded Woofer
JANTZ.025-18 1 Jantzen .025 mH 18 ga
JANTZ.27-18 1 Jantzen .27 mH 18 ga
JANTZ.80-18 1 Jantzen .80 mH 18 ga
JANTZ1.5-18 1 Jantzen 1.5 mH 18 ga
DMPC-8.2 2 Dayton 8.2 uF cap
DMPC-6.2 2 Dayton 6.2 uF cap
DMPC-18 2 Dayton 18 uF cap
DMPC-25 2 Dayton 25 uF cap
DNR-4.0 2 Dayton 2 ohm resistor
DNR-8.0 1 Dayton 8 ohm resistor
TIES 8 Cable ties
CAULK 2 36" Speaker Sealing Caulk