Dayton Audio RS621 Speaker Kit w - Manual

Crossover Diagram
Frequency Graph
Specifications: • Impedance: 8 ohms • Frequency response: 60 - 20,000 Hz • SPL: 88 dB 2.83V/1m • Power Handling: 65 watts RMS.
The Dayton RS150S-4 woofer and Dayton RS28AS-4 tweeter have been sonically matched and integrated in this system. Both drivers’ motors incorpo-
rate magnetic shielding to prevent interference with adjacent equipment. The net crossover point between the woofer and tweeter is at about 2,300 Hz. A
fourth-order acoustic slope was used for the low pass filter and the tweeter utilizes a simple third-order electrical filter.
The overall output capability and impressive bass response of this compact loudspeaker is second to none—supplemented with a subwoofer, this sys-
tem really rocks! It is very accurate, yet not harsh or overly clinical. When used properly, the RS621 can handle a healthy amount of power and produce
sound pressure levels that will fill any average-sized room. Overall, these great all-around compact speakers will excel in a myriad of applications.
Optimal Cabinet (0.25 ft 3 )
Loudspeaker Kit
Components
Based on the
Dayton Audio RS621 Speaker Kit
The crossovers included with this kit were optimized for the above driver/cabinet combination. A diagram of the optimal cabinet has been provided as a
guideline. Varying greatly from the optimal cabinet volume may result in changes to the frequency response and less than desired performance.