Controlling, Maintaining, 2 controlling – SCANTECH ID (Champtek company) MICA M-9030 User Manual

Page 26: 3 maintaining

Using this Scanner

3.2 CONTROLLING

This scanner can be controlled from the POS/PC system via the RS232 interface or via
USB while using comport emulation. Control is achieved by transmitting single byte
commands to the scanner. The following commands are available:

ASCII code

Function

Byte is also called

05 Hex

Power-up re-initialization

ENQ or

0E Hex

Enable (cancels disable)

Shift Out or

0F Hex

Disable

Shift In or

12 Hex

Sleep

DC2 or

14 Hex

Wake (cancels sleep)

DC4 or

NOTE

More commands are available upon request. Please contact your
dealer for more information.

3.3 MAINTAINING

This scanner requires little maintenance. Only occasional cleaning of the scanner
window is necessary to remove dirt and fingerprints. Cleaning can be performed
during operation with a non-abrasive glass spray cleaner and a soft lint-free cloth.

NOTE

Please contact your dealer for specific cleaning material.