SCANTECH ID (Champtek company) IG300BT - Manual (Page 9)

9
scanner will indicate with red LED and beeper
warning.
IG300BT Cradle
1) Connect the supplied communication cable at
the bottom side of the scanner and you will
hear a “click” when the connection is made.
2) Turn off the host system.
3) Connect the other side of the communication
cable to the right connector of your Host
system.
4) Plug the external power supply into the power
jack on the bottom of the cradle.
5) Plug the power supply into the AC outlet.
6) Turn on your Host system.
7) To set up Bluetooth Communication between
the scanner and cradle. (see chapter 4)