SCANTECH ID (Champtek company) IG300BT - Manual (Page 25)

25
7.3 Batch Mode
This Batch mode function is enabled when you have
scanned “Memory ON” barcode. Scanning data is
stored in the memory of the scanner. This function is
disabled when you have scanned “Memory OFF”
barcode.
When you have scanned “Out Of Range” barcode,
The scanner transmits the scanning data of work
range. In case of the scanner is out of working range,
the scanner will store the scanning data to memory.
You can scan the barcode “Memory read” barcode to
transmit the stored data to cradle immediately of
working range.
When the communication reconnected again, you
can scan the barcode “Memory read” barcode to
transmit the stored data to cradle immediately. Or
scan the “Memory clear” barcode to erase all stored
memory. The capacity of this memory depends on
the scanned data size, approximately 20,000 sets for
EAN13 of data .
Out Of Range
Memory Mode ON
Memory Read
Memory Clear