Xoro HRT 7000 - Manual (Page 18)

18 HRT 7000
Engl
ish
Recorder
Recording
If you want to record a broadcast, please plug firstly an USB storage to the USB port on the front
side of the device. Choose a TV channel and a TV program and press the REC button on the
remote control. The standard duration time for each recording is 2 hours (can be changed by the
settings). If you want decrease or increase the duration time of the recording please press again the
REC button. Now, you get access to the duration time and you can manipulate them.
To stop or ends the recording, please press the STOP button on the remote control. A safety
request appears on the screen. Press again the STOP button and the recording stops completely.
Time Shift
To use the time shift function, the option have to be activate in the setup settings. How to control the
setting:
1.
Plug an USB storage to the USB port
2. Press MENU button and the setup settings appears on the screen
3. Navigate to the last symbol REC by using the ▲/▼ buttons.
4. Switch with the ► button to the right side
5. Choose the option DVR configuration
6. Choose the option Time shift and change the setting to ON.
Now the Time Shift function is activated and runs the whole time during the live picture. If you
change the TV channel than the time shift starts new for the new TV channel.
When you press the INFO button during time shift mode than an information window appears on the
screen.
Navigation during time shift mode:
◄/►
Move the slide inside the time bar. Press OK to jump them.