Universal Audio UAD SYSTEM ver.6.3.2 - Manual (Page 85)

UAD System Manual - 85 - Chapter 8: Tempo Sync
Out of range
When a parameter note value is out of range of the current tempo note value,
the note value is displayed in parentheses on a red background (
Figure 22 ).
Modes with Tempo Sync
The UAD DM-1 and UAD DM-1L plug-ins (and DM-1 within CS-1) have a
Mode menu that switches the plug-in operation between delay, chorus, and
flanger mode. In these plug-ins, when the Mode is set to DualDelay and Ping-
Pong, the delay Time and modulation Rate parameters are simultaneously
available for Tempo Sync.
However, when the plug-in is set to a Chorus or Flanger mode, only the Rate
is available for Tempo Sync. This enables the more typical and musical cho-
rus/flange effect by only syncing the modulation Rate to the tempo while the
delay time remains constant.
Roland RE-201 Sync
When the RE-201is in Tempo Sync
mode, note values can be imprecise
due to the fixed tape head relation-
ships. Values that are imprecise approximations (but are within the available
delay time range) are displayed with a “+” or “–” symbol. The leading head
in the current mode is accurately synced; the other values are based on the
fixed tape head relationship. Note that when a parameter note value is out of
range of the current tempo note value, the note value flashes (instead of in pa-
rentheses on a red background as in
Figure 22 ).
Figure 22. Tempo Sync note value display