Billet Specialties Power Steering Hose Kit for Remote Reservoir - Manual

500 Shawmut Avenue • La Grange, Illinois 60526 • Tech Line 708/588-0505 • Fax 708/588-7181
#77900 - Power Steering Hose Kit
Tools needed:
• 1” open end wrench
• 15/16” open end wrench
• 11/16” open end wrench
• Electrical/vinyl tape
• Hacksaw with fine tooth metal blade OR cut off wheel
Tech Tip:
Install the proper adapter into the Rack/Box. Do not use Teflon tape or pipe dope,
this can get into the system and do substantial damage. Inverted flare fittings should
be torqued to 25-24 ft/lbs and O-ring fittings should be torqued to 20 ft/lbs.
Applications:
• GM metric rack & pinion
• 1978 - present GM metric 800 gear box
• 1965 - 77 GM SAE 800 gear box
• Classic Performance Products - 500 Series box
• Flaming River rack & pinion
• Dodge Omni rack & pinion
• 1974-77 Ford Mustang II rack & pinion
* A power steering adapter kit (#77901) is available for other applications, call for info 1 (708) 588-0505.
Before Installing This Hose Kit:
Install the Tru Trac or V Trac system in vehicle.
Position the remote power steering reservoir as close to the power
steering pump as possible. The remote power steering reservoir
should also be mounted higher than the power steering pump. The
radiator core support works well as a mounting location for the
reservoir in most cases.
If your application is not listed below...
Do Not Attempt To Install This Kit*
Step 1: Prepare the fittings and adapters for installation. Use the guide below to select the correct adapters for your application.
Compare the existing hose ends to the adapter if you are unsure of the box/rack that you have.
•Denotes number of fittings
required for the listed application
•
•
Re
v. 0
7/08
11/1
6-1
8 in
ver
ted flar
e t
o
-6AN po
wer s
teer
ing adap
ter
1/2-20 in
ver
ted flar
e t
o
-6AN po
wer s
teer
ing adap
ter
5/8-1
8 in
ver
ted flar
e t
o
-6AN po
wer s
teer
ing adap
ter
M1
8 x 1
.5 O-r
ing t
o -6AN
po
wer s
teer
ing adap
ter
M1
6 x 1
.5 O-r
ing t
o -6 AN
po
wer s
teer
ing adap
ter
M1
4 x 1
.5 O-r
ing t
o -6 AN
po
wer s
teer
ing adap
ter
-6 AN 90˚ hose end -10 AN 90˚ hose end -6 AN s
traight hose end
-10 AN s
traight hose end
GM Metric Rack & Pinion • • ••• • • •
1978-up GM Metric 800 gear box • • ••• • • •
1965-77 GM SAE 800 gear box • • ••• • • •
Classic Performance Products
500 Series gear box
• • ••• • • •
Flaming River Rack & Pinion • • ••• • • •
Dodge Omni Rack & Pinion • • ••• • • •
1974-77 Ford Mustang II
Rack & Pinion
• • ••• • • •