Billet Specialties Premium Tru Trac Serpentine System - Pontiac - Manual (Page 6)

www.billetspecialties.com www.billetspecialties.com
11
Figure 6: Install Tensioner Bracket Assembly
[A] Now is a good time to install the heater hose and clamp.
[B] Place tensioner / AC bracket assembly on passenger side of motor as shown.
[C] Thread one 1-1/16” tall standoff onto the top 3/8” stud and finger tighten.
Figure 5: Assemble Tensioner Bracket
Apply anti-seize to the treads of the 3/8-16 x 1” socket head cap screw.
[A] Attach AC bracket to the back of the tensioner bracket as shown. Make sure key is fully
inserted into bracket.
[B] Thread cap screw through tensioner bracket and into AC bracket, tighten firmly.
B A
B
C A